Coaxlinkシリーズ

究極のパフォーマンスと優れた価値のCoaXPressフレームグラバー

At a glance
  • CoaXPress接続最大8個のPCIeフレームグラバー
  • 機能が豊富なデジタル I/O ラインが最大20本まで
  • 多種多様なカメラコントロール機能
  • Memento Event Logging Tool
  • Copper or fiber optic connection
CXP-over-Fiber
CXP-12
CXP-6
CXP-3
CXP-over-Fiber
 
Coaxlink QSFP+

4接続CoaXPress-over-Fiberフレームグラバー

CXP-over-Fiber
暫定版
Coaxlink CXP-12 to QSFP+ Converter

4接続のCoaXPress CXP-12/CoaXPress-over-Fiberコンバータ

CXP-12
 
Coaxlink Quad CXP-12

4接続CoaXPress CXP-12 フレームグラバー

CXP-12
 
Coaxlink Quad CXP-12 JPEG

JPEG 圧縮に対応した4接続CoaXPress CXP-12フレームグラバー

CXP-12
New
Coaxlink Quad CXP-12 Value

4接続CoaXPress CXP-12 フレームグラバー

CXP-12
New
Coaxlink Quad CXP-12 DF

データ転送に対応した4接続CoaXPress CXP-12フレームグラバー

CXP-12
 
Coaxlink Duo CXP-12

2接続CoaXPress CXP-12フレームグラバー

CXP-12
 
Coaxlink Mono CXP-12 LH

1接続CoaXPress CXP-12フレームグラバー

CXP-6
 
Coaxlink Octo

PCIe 3.0 8 接続 CoaXPress フレームグラバー

CXP-6
 
Coaxlink Quad G3 DF

PCIe 3.0 4接続CoaXPress フレームグラバー、データ送出

CXP-6
 
Coaxlink Quad G3

PCIe 3.0 4接続CoaXPressフレームグラバー (ファン冷却ヒートシンク)

CXP-6
 
Coaxlink Quad G3 LH

PCIe 3.0 4接続CoaXPressフレームグラバー (パッシブヒートシンク)

CXP-6
 
Coaxlink Quad 3D-LLE

3D プロファイリング用レーザーライン抽出機能搭載 Quad CXP-6 フレームグラバー

最速かつ最高解像度のカメラから画像を取得
最速かつ最高解像度のカメラから画像を取得

  • 業界最高のデータ取り込み速度
  • カメラからホストPCメモリまでの最大帯域幅5,000 MB/秒


信頼性の高い接続を得る堅牢なコネクタ
信頼性の高い接続を得る堅牢なコネクタ

  • Coaxlink CXP-6ではプッシュプル式ラッチシステムを持つDIN 1.0/2.3コネクタを使用しています
  • Coaxlink CXP-12で使用されるMicro-BNC(HD-BNC)コネクタには確実なプッシュターンのバヨネット式ポジティブロックが採用されているため、素早く簡単に着脱することができます


CustomLogic: ユーザー独自のFPGAロジック!


高性能DMA(Direct Memory Access)
高性能DMA(Direct Memory Access)

  • ユーザーに割り当てられたメモリおよびPCIアドレスを持つハードウェアボードに直接転送
  • ハードウェアのスキャッタギャザー対応
  • 64ビットのアドレス割当機能


ラインスキャンのトリガ機能 2/2

  • モーションエンコーダから送られた信号に基づいて、Coaxlinkフレームグラバーがカメラスキャンニング率を調整します。対象が速く移動する場合、カメラのライン取り込みレートが増加します。対象が遅く移動する場合、カメラのライン取り込みレートが減少します。
  • Coaxlinkボードは直交モーションエンコーダから送信されたA/B信号を解釈し、対象がどの方向(前進または後退)に移動しているのかを検知します。
  • オプションとして、対象が前進したときのみまたは後進したときのみラインを取り込むようにCoaxlinkボードで設定することができます。
  • 後退モーションキャンセル機能を使用すると、後退する動きが検知されたときに取り込みが中止されます。対象が再び前進し始めると、中止前とまったく同じ場所から取り込みを再開することができます。
  • レート コンバーターを使用すると、モーションエンコーダの解像度よりも高いまたは低い任意の解像度(ユーザーがプログラム可能)でラインを取り込むことができます。これにより、アプリケーション開発中の自由度や柔軟性が非常に大きくなります。
  • レート ディバイダ―により、カメラで、モーションエンコーダの解像度よりも低い解像度でラインを取り込むことが可能となります。レート ディバイダーはエンコーダからの入力信号の周波数を整数(ユーザーがプログラム可能)で分割します。


<a target="_blank" href="https://www.euresys.com/en/Products/Machine-Vision-Software/eGrabber"target="_blank">eGrabber対応
eGrabber対応


PCIe 3.0(Gen 3) x4 / x8 またはPCIe 2.0(Gen 2) x4バス
PCIe 3.0(Gen 3) x4 / x8 またはPCIe 2.0(Gen 2) x4バス

  • 最大6,700 MB/s 持続バス帯域幅


標準同軸ケーブルの使用
標準同軸ケーブルの使用

  • データ転送、カメラ制御、トリガおよび電力のための廉価な1本のケーブル
  • 過酷な環境でも極めて高い信頼性と柔軟性を提供


ダイレクト GPU 転送
ダイレクト GPU 転送

  • AMD DirectGMA および NVIDIA (CUDA) 用サンプルプログラムをご利用いただけます。
  • ダイレクトGPU転送によって、システムメモリの不要なコピー作成の排除、CPUオーバーヘッドの削減、さらにレーテンシーの低減が実現するため、アプリケーションのデータ送出時間における大々的なパフォーマンス改善を得ることができます。
  • GPU メモリへの画像データのダイレクトキャプチャーは AMD 製 DirectGMA を使用して実現可能です。AMD FirePro W5x00 以降、およびすべての AMD FirePro S シリーズ製品と互換しています。


エリアスキャンのトリガ機能

  • 対象が所定位置に来ると、トリガを使用して、ラインの取り込みが開始されます。ハードウェアトリガはCoaxlinkのI/Oラインから来ます。ソフトウェアトリガはアプリケーションから来ます。
  • オプションのトリガディレイを使って、プログラマブルな時間だけ取り込みを遅らせることができます。
  • トリガ デシメーション機能により、トリガのいくつかをスキップできます。
  • カメラの露光調整機能により、アプリケーションでカメラの露光時間を調整できます。
  • Coaxlinkボードは、取り込みを開始する際に、適当なタイミングで、出力ラインに接続された照明システムの制御信号を発生させます。


レートコンバーターを用いたフレキシブルなラインスキャンカメラの操作

  • レートコンバータは、プログラム可能な高性能の周波数逓倍器/分割器です。
  • モーションエンコーダおよびラインスキャンカメラと一緒に使用することで、画像ピクセルのアスペクト比を選択できます。
  • 一続きの画像をキャリブレーションして、簡単にスクエアピクセル (アスペクト比1:1) を得ることができます。


Genicam互換
Genicam互換

以下に対応しています

  • GenApi
  • Standard Feature Naming Convention (SFNC)
  • GenTL


ケーブル対応
ケーブル対応


Coaxlink CXP-6のロングケーブルに対応

  • 40メートル、CXP-6速度 (6.25 Gbps)
  • 100メートル、CXP-3速度 (3 Gbps)

Coaxlink CXP-12のロングケーブルに対応
  • 40メートル、CXP-12速度 (12.5 Gbps)
  • 72メートル、CXP-6速度 (6.25 Gbps)
  • 100メートル、CXP-3速度 (3 Gbps)


Memento Event Logging Tool

  • Mementoは、CoaxlinkおよびGrablinkカードで使用可能な高度な開発・デバッグツールです。
  • Mementoはカメラ、フレームグラバー、そのドライバ、およびアプリケーションに関連したイベントすべての正確なログを記録します。
  • 開発者は、タイムスタンプされたイベントの正確なタイムラインを、コンテキスト情報とロジックアナライザビューとともに取得できます。
  • アプリケーション開発、デバッグ、およびマシン動作中に重要な支援を行います。


汎用I/Oライン
汎用I/Oライン

  • 広範なセンサーおよびモーションエンコーダと互換性あり
  • 高速差動入力:直交モーションエンコーダは最大5 MHzまで対応
  • 絶縁電流検出入力:5V、12V、24Vの信号電圧に対応、最大50 kHz、個別のガルバニック絶縁は250VDCおよび170VAC RMSまで。
  • 絶縁非接触出力
  • 高速5V対応TTL入力/LVTTL出力


ラインスキャンのトリガ機能 1/2

Coaxlinkは継続的なWebスキャンニング (ラインを失うことなく、無限に継続的に移動面の検査を行う) および離散的なオブジェクトスキャンニング (カメラの前で移動している物体の画像を取り込む) に対応しています。

  • 対象が所定位置に来ると、トリガを使用して、ラインの取り込みが開始されます。ハードウェアトリガはボードのI/Oラインから来ます。ソフトウェアトリガはアプリケーションから来ます。
  • 起動後の取り込みモード:
    • 無限連続 (Web検査アプリケーション用)
    • プログラム可能なライン数で連続 (長さが既知の物体の画像取り込み用)
    • 終了トリガを受信するまで連続 (長さが異なる各種の物体の画像取り込み用)
  • オプションのトリガディレイを使って、プログラマブルなライン数だけ取り込み開始を遅らせることができます。


Windows、Linux、およびmacOS用ドライバを提供
Windows、Linux、およびmacOS用ドライバを提供

  • Intel 64ビットプラットフォームとARM 64ビットプラットフォームのサポートを含む


比較する製品をコラムで選択し、比較してください
製品の違いは青色で強調表示されています。
 
製品を選択してください
製品を選択してください
Mechanical
Format
Standard profile, half length, 8-lane PCI Express card
-
Cooling method
Air cooling, fan-cooled heatsink
Air cooling, fan-cooled heatsink
Housing
-
Aluminum housing
Mounting
For insertion in a standard height, 8-lane or higher, PCI Express card slot
Desktop
Connectors
  • 'QSFP+' on bracket:
    • Enhanced Quad Small Form-factor Pluggable port
    • CoaXPress-over-Fiber host interface
  • 'EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • 'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:
    • 2x 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'I/O EXTENSION' on PCB:
    • 26-pin 2-row 0.05" pitch pin header with shrouding
    • I/O extension lines and power output
  • 'AUXILIARY POWER INPUT' on module:
    • 6-pin PEG power socket
    • 12 VDC power input for I/O power
  • 'C2C-LINK' on module:
    • 6-pin 2-row 0.1" header
    • Card to card link
  • 'A', 'B', 'C', 'D' on front panel:
    • 4x Micro BNC female connectors
    • CoaXPress host interface
  • 'QSFP+' on rear panel:
    • Enhanced Quad Small Form-factor Pluggable port
    • CoaXPress-over-Fiber device interface
  • 'POWER IN' on rear panel:
    • 2-pin 5.08mm pitch terminal socket
    • 24 V DC power input for internal use and PoCXP
LED indicators
  • 'A', 'B', 'C', 'D' on bracket:
    • Bi-color red/green LEDs
    • CoaXPress Host connector indicator
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status indicator
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • Board status indicator
  • 'A', 'B', 'C', 'D' on front panel:
    • Bi-color red/green LEDs
    • CoaXPress Host connector indicator
  • 'A', 'B', 'C', 'D' on rear panel:
    • Bi-color red/green LEDs
    • CoaXPress Device connector indicator
  • 'FPGA OK' on rear panel:
    • Bi-color red/green LED
    • FPGA status indicator
  • 'BOARD OK' onrear panel:
    • Bi-color red/green LED
    • Board status indicator
Switches
'RECOVERY' on PCB:
  • 3-pin 1-row 0.1" header or 2-way DIP switch
  • Firmware emergency recovery
-
Dimensions
PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in
L 112 mm x H 55 mm x D 208 mm
Weight
176 g, 6.21 oz (without transceiver)
TBD g, TBD oz (3629)
Host bus
Standard
PCI Express 3.0
-
Link width
  • 8 lanes
  • 1 lane, 2 lanes or 4 lanes with reduced performance
-
Link speed
  • 8.0 GT/s (PCIe 3.0)
  • 5.0 GT/s (PCIe 2.0) with reduced performance
-
Maximum payload size
512 bytes
-
DMA
32- and 64-bit
-
Peak delivery bandwidth
7,800 MB/s
-
Effective (sustained) delivery bandwidth
6,700 MB/s (Host PC motherboard dependent)
-
Power consumption
Typ. 16.5 W ( 3.0 W @ +3.3V, 12.5 W @ +12V), excluding I/O power output and optical transceiver module
-
Camera / video inputs
Interface standard(s)
CoaXPress 1.0, 1.1, 1.1.1 and 2.0, CoaXPress-over-Fiber Bridge Protocol 1.0
CoaXPress 1.0, 1.1, 1.1.1 and 2.0, CoaXPress-over-Fiber Bridge Protocol 1.0
Connectors
  • Enhanced Quad Small Form-factor Pluggable (QSFP+) port
  • Compliant with SFF-8436 (4 x10 Gbit/s Pluggable Transceiver) specification
  • Compliant with CoaXPress over Fiber
  • Available power for the module: 3.5 W (SFF-8436 Power Level 4)
Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
Status LEDs
One CoaXPress Host connection status LED per connection
One CoaXPress Host connection status LED per connection
Number of cameras
  • Area-scan cameras:
    • One 1- or 2- or 4-connection camera
  • Line-scan cameras:
    • One 1- or 2- or 4-connection camera
  • Area-scan cameras:
    • One 1- or 2- or 4-connection camera
  • Line-scan cameras:
    • One 1- or 2- or 4-connection camera
Maximum aggregated camera data transfer rate
5,000 MB/s
50 Gbit/s (5,000 MB/s)
Supported CXP down-connection speeds
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
Supported CXP up-connection speeds
  • Low-speed 20.83... Mbps (CXP-1 to CXP-6)
  • Low-speed 41.66... Mbps (CXP-10, CXP-12)
  • Low-speed 20.83... Mbps (CXP-1 to CXP-6)
  • Low-speed 41.66... Mbps (CXP-10, CXP-12)
Number of CXP data streams (per camera)
1 data stream per camera
1 data stream per camera
Maximum CXP stream packet size
16,384 bytes
16,384 bytes
PoCXP (Power over CoaXPress)
-
  • PoCXP Safe Power:
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • A +24V power source must be connected to the POWER IN connector
Camera types
  • Area-scan cameras:
    • Grayscale and color (YCbCr, YUV, RGB and Bayer CFA)
    • Single-tap (1X-1Y) progressive-scan
  • Line-scan cameras and contact imaging sensors:
    • Grayscale and color RGB
-
Camera pixel formats supported
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGB16
  • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16
  • YCbCr601_422_8, YCbCr601_422_10
  • YCbCr709_422_8, YCbCr709_422_10
  • YUV422_8, YUV422_10
  • Raw
-
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
-
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
-
Line-scan camera control
Scan/page trigger
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
-
Line trigger
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
  • Rate Divider tool
-
Line strobe
  • Accurate control of the strobe position for strobed light sources.
-
On-board processing
On-board memory
4 GB
-
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
  • Optional swap of R and B components
  • Little endian conversion
-
Flat-field correction
-
-
Input LUT (Lookup Table)
  • Monochrome 8-bit to 8-bit transformation
  • Monochrome 10-bit to 8-, 10- or 16-bit transformations
  • Monochrome 12-bit to 8-, 12- or 16-bit transformations
-
Bayer CFA to RGB decoder
'1-camera' firmware variant:
  • 3x3 linear interpolation method
  • 3x3 median-based interpolation method
-
Pixel binning
-
-
CustomLogic firmware variants
-
-
Data stream statistics
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
-
Event signaling and counting
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
-
Metadata Insertion
Recording of metadata beside image data.
  • The metadata are composed with a configurable set of general purpose event counters, quadrature encoder position counters and/or I/O line status.
  • Line metadata are captured every acquired image line.
  • Buffer metadata are only captured when the first image line of a buffer is acquired.
  • Allows line-scan applications to correlate image data with system events including motion encoder positions.
NOTE: Only available on selected line-scan firmware variants. Refer to release notes.
-
General Purpose Inputs and Outputs
Number of lines
20 I/O lines:
  • 4 differential inputs (DIN)
  • 4 singled-ended TTL inputs/outputs (TTLIO)
  • 8 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.
-
Usage
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
-
Electrical specifications
  • DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: 200 kHz isolated current-sense input with wide voltage input range up to 30V, compatible with totem-pole (push-pull) HTL drivers, 5V TTL/RS-422 differential line drivers, 5V CMOS drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock!
-
Filter control
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
-
Polarity control
Yes
-
Power output
Non-isolated, +12V, 1A, with electronic fuse protection
-
I/O Toolbox tools
The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers):
  • Line Input tool (LIN): edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): a composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Device Link Trigger tool (DLT): delivers an event on reception of a valid high-speed CoaXPress 2.0 connection trigger packet message from the remote device.
  • User Actions Scheduler tool (UAS): to delegate the execution of 'User Actions' at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • The 'Input Tools' (LIN, QDC, DLT and UAS) can be further processed by the 'Event Tools' (DEL, DIV and MDV) to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
-
I/O Toolbox composition
Determined by the selected firmware variant:
  • '1-camera': 8 LIN, 1 QDC, 2 DLT, 1 UAS, 2 DEL, 1 DIV, 1 MDV, 2 C2C
  • '1-camera, line-scan': 8 LIN, 1 QDC, 2 DLT, 1 UAS, 2 DEL, 1 DIV, 1 MDV, 3 C2C
-
C2C-Link
Description
  • Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras.
  • Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras.
-
Specification
  • C2C-Link synchronizes cameras connected to:
    • the same card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
  • Maximum distance:
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate:
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices:
    • Less than 10 ns for cameras on the same card or on different cards in the same PC
    • Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length)
-
Electrical
Supply voltage
-
24 V DC (tolerance. TBD), via external power supply block (not included)
Power connector
-
POWER IN connector: 2-pin 5.08 mm pluggable terminal block socket
Power consumption
-
  • 29 W for internal use (estimation TBC)
  • 4 x 17 W for PoCXP
Software
Host PC Operating System
  • Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
  • Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
-
APIs
  • EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher
  • GenICam GenTL producer libraries compatible with C/C++ compilers:
    • 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications
    • 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications
-
Environmental conditions
Operating ambient air temperature
0 °C to +55 °C / +32 °F to +131 °F
0 °C to +50 °C / +32 °F to +122 °F (TBC)
Operating ambient air humidity
10% to 90% RH non-condensing
10% to 90% RH non-condensing (TBC)
Storage ambient air temperature
-20 °C to +70 °C/ -4 °F to +158 °F
-20 °C to +70 °C/ -4 °F to +158 °F (TBC)
Storage ambient air humidity
10% to 90% RH non-condensing
10% to 90% RH non-condensing (TBC)
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2014/30/EU
  • United States FCC rule 47 CFR 15
  • European Council EMC Directive 2014/30/EU
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55032:2015 / CISPR 32:2012 Class B
  • FCC 47 Part 15 Class B
  • EN 55032:2015 / CISPR 32:2012 Class A
  • FCC 47 Part 15 Class A
EMC - Immunity
  • EN 55035:2017 / CISPR 35:2016
  • EN 61000-6-2:2005 / IEC 61000-6-2:2016
  • EN 61000-4-2:2009
  • EN 61000-4-3:2006
  • EN 61000-4-4:2004
  • EN 61000-4-6:2014
TBD
KC Certification
Korean Radio Waves Act, Article 58-2, Clause 3
Korean Radio Waves Act, Article 58-2, Clause 3
Flammability
PCB compliant with UL 94 V-0
PCB compliant with UL 94 V-0
RoHS
European Union Directive 2015/863 (ROHS3)
European Union Directive 2015/863 (ROHS3)
REACH
European Union Regulation 1907/2006
European Union Regulation 1907/2006
WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Must be disposed of separately from normal household waste and must be recycled according to local regulations
HS Acquisition

AOI、3D SPI、3Dリード/ボール検査機器向け高速画像取り込み

CoaxlinkおよびGrablinkカードは、現在市場で最速のデジタルカメラから画像を取り込むためのロバストで安定した機能を持つ、頼りになるフレームグラバーです。正確なカメラ制御と同期機能が特徴です。
  • AOI (自動光学検査)装置
  • 3D SPI(はんだペースト検査)機器
  • 3Dリード/ボール検査機器
LS Acquisition Elec

フラットパネルディスプレイ検査および太陽電池検査向けの非常に高い画質のラインスキャン画像の取り込み

CoaxlinkおよびGrablinkカードは、現在市場で最速のデジタルカメラから画像を取り込むためのロバストで安定した機能を持つ、頼りになるフレームグラバーです。正確なラインスキャンカメラ制御と同期機能が特徴です。
3D Acquisition Elec

電子検査装置用の 3D 画像取り込み

関連製品
Coaxlink Quad 3D-LLE
LS Acquisition Man

表面検査装置用のラインスキャン画像取り込み

CoaxlinkおよびGrablinkカードは、現在市場で最速のデジタルカメラから画像を取り込むためのロバストで安定した機能を持つ、頼りになるフレームグラバーです。正確なラインスキャンカメラ制御と同期機能が特徴です。
LS Acquisition Textile

繊維検査装置用のラインスキャン画像取り込み

CoaxlinkおよびGrablinkカードは、現在市場で最速のデジタルカメラから画像を取り込むためのロバストで安定した機能を持つ、頼りになるフレームグラバーです。正確なラインスキャンカメラ制御と同期機能が特徴です。
3D Acquisition Man

検査装置用の 3D 画像取り込み

関連製品
Coaxlink Quad 3D-LLE
ITS Transmission Coax

交通の監視、モニターおよび管理のための長い同軸ケーブルによる高精細ビデオの転送および取り込み